10 120v thermostat switch : Expert's Pick
- 【Relay output, easy to use】 Plug-and-play design, just plug the device into this thermostat plug outlet and set parameters, it will work as programmed. Power supply: 120V±15% AC; Output:Max 15A/120V.
- 【Easy to program】 Just set start temperature and stop temperature, this plug in thermostat will work in heating or cooling mode. Temperature control range:-72℉~176℉(-40℃~120℃), temperature control accuracy: ±1%. Celsius and Fahrenheit can be converted. This digital temeprature controller also supports temperature calibration if needed.
- 【Timing function】 F01 Cycle Timer mode; F02 Countdown ON mode, F03 Countdown OFF mode, F04 Countdown ON and Countdown OFF mode. You can choose F01 mode to control the device to work in cycles, or choose F02~F04 modes to countdown to turn on or turn off the device. Set range: 0~99 hours 59 minutes. Please note that temperature control function and timing function cannot be used at the same time.
- 【More functions】 3m NTC 10K temprature sensor probe. Large LCD display. Temperature calibration. Reset function. Data storage function that all parameters set can be saved after power off.
- 【Wide Range of Application】This temperature controlled outlet plug is widely used for greenhouse, reptile, incubator, terrarium, freezer, refrigerator, heater, fridge, homebrew, vivarium, fermentation, heat mat, and other temperature-controlled system. It can also be used as a timer for cycle timing and countdown.
- Price For: Each Number of Switches: 1 Input Voltage: - Full Load Amps: - Full Load Amps @ 240VAC: 10A Item: Line Volt Mechanical Tstat Inductive Amps @ 240V: 4.5A Cooling Full Load @ 120V: 4.5A Cooling Locked Rotor @ 120V: 22A Full Load Amps @ 120V: 15A Switch Type: SPDT Switch Action: Open/Close on Rise Sensor Type: Bi-Metal Actuator Color: White
- Voltage Range: 120 to 277VAC Cooling Locked Rotor @ 240V: 22A Inductive Amps @ 120V: 4.5A Application: Heating and Cooling Differential: 2 to 4 Degrees F Mounting Type: Vertical Width: 2-3/4" Control Range: 50 Degrees to 90 Degrees F Contact Rating Resistive @ 277V: 22A Contact Rating Resistive @ 240V: 22A Height: 4-3/4" Contact Rating Resistive @ 120V: 22A Cooling Full Load @ 240V: 4.5A
- Depth: 1-1/2" Country of Origin (subject to change): United States
- 2 Working modes: this digital LED temperature controller module has 2 working modes, heating mode (start temperature is lower than stop temperature) and cooling mode (start temperature is higher than stop temperature), range from -50°C to 110°C; The high temperature control accuracy reaches 0.1℃
- Stable and reliable: the LED indicator light can display the current output status; The digital display tube can display the measured temperature, and the temperature measurement and control accuracy is high
- Durable material: this XH-W3001 digital thermostat switch is made of ABS, one of the five major synthetic resins, which is non-toxic, strong impact resistance, heat and low temperature resistance
- Waterproof probe: equipped with a 1-meter NTC10K probe made of stainless steel, which is waterproof and not easy to rust, easy to use and can last for a long time
- Suitable for: the temperature controller module can be widely applied in the conditioning systems, incubators, equipment cases, temperature control protection and others
- THERMOSTATIC CONTROL: This thermostat will automatically turn on the connected heaters when the outside temperature drops below 35°F, and turn it off when temperature reaches about 48°F. Perfect solution to the trouble of water freezing. Let you have a comfortable winter!
- SAVE TIME & MONEY: Automatic activation saves your time, no need to plug cable back and forth when temperature fluctuates. It uses power only when necessary, thus helps save a lot on your electric bill.
- EASY TO USE: No assembly required, plug-n-play. Just plug the thermostat into a power socket, and plug your 120V heating device into the thermostat outlet, you are ready to go. Suitable for both 3 prong and 2 prong plug.
- DURABLE & RELIABLE: Adopting UL listed and TUV-certified sensor, and covered with PC+ABS V0 grade flame retardant material, safe to use. The LED light shows whether the heaters is running, very convenient.
- WIDELY USE: With a maximum load of 16A, this temperature controlled outlet is widely used for pipe heat tape, roof heating cables, pond de-icers, bird bath heaters, automotive battery heater, chicken farm, dog house, pump house etc.
- Type: KSD301 120 degrees Celsius Thermal Control Switch 110V/120V/250V 10A NC (Normal Close), 6.3mm pin
- Normally Closed: The original state of temperature control switch contact is closed, and open when the temperature sensing exceeds the rated temperature 120 Celsius degree
- Advantage: Double metal chip, speed dynamic type, sensitive, reliable, stable action temperature, long service life, no arc phenomenon.
- Easy to installation : The flange on the switch is float and easy to installation.The pin width is 6.3mm
- Application: Mainly used for microwave,oven,coffee maker,Speed Cook oven,heater,Dryer,gas furnace,Bath Vent/Heater,wall heater,motor electric heating water dispenser, water bottles, coffee shell, electric iron, dryer, air conditioning, water heater, electronic cooker, heater, motor cleaner
- 【Dual temperature humidity controller, Great DIY tools】KT100 can work with independent heater or cooler, humidifier or dehumidifier, with °F display . You can connect it to different places as you need, Make them more special.
- 【Easy setting, wide range】KT100 Thermostat Humidity control the equipment by setting the start/stop temperature/humidity. with -58~176°F temperature range, humidity control range is 10~99%RH.
- 【Various Function】KT100 Thermostat Hygrometer regulator can set the compressor delay time(0~5min) to make the cooler delay start. By setting high/low temperature/humidity alarm value to keep the home appliance, hatch, greenhouse,ventilator fan, freezer, smoker,and other appliances save.
- 【Data storage and reset function】All parameters setting can be saved after short circuit and power off, and it also can be reset as requirement.
- 【Calibrate function】±1°F/±3%RH Control Accuracy with (-30~30°F) Temperature Calibration, (-30~30%RH) Humidity calibration, make the all process more accurate, keep the temperature humidity in desired range.
- 【Wide temperature range.】The range for KT8230 is -22~572℉, This is a relay temperature controller, There is no voltage output directly, you need to connect additional power supply for the load, then it can be set by differential (1~80℉) to turn on/off the load, it is like a switch.
- 【Output is 30A relay, more accurate.】The temperature controller 120V can be used for big power equipment, like incubator, brooder, refrigerator,Fermenter,Greenhouse,etc. 1°F accuracy to keep the temperature in desired range.
- 【Support delay start function and temperature correction.】The cooler and heater will delay to work if you set the delay time(PL: 0~7min) not 0, You can set depend on what you need. -30.0°F～30.0°F calibrate the temperature when there is error.
- 【Safe protection.】Temperature Regulator will alarm when it exceed temperature limit or sensor error, alert you when something wrong happened. You can also set the low(LS) and high temperature limit(HS) to change the temperature range, LS < Setting Temperature < HS.
- 【Simple operation.】 All parameters setting can be saved after restart, you don’t need to set the thermostat regulator when power off, or restart it from vacation. 2m NTC sensor allows more possibility for home
- 【Two direct output】KT99 digital thermostat support two independent direct output, with 2pcs 1.5m NTC waterproof sensor can work with two independent equipment, with °F display.
- 【Easy operation】KT99 Temperature controller control the load by setting the start and stop temperature. -58~248°F wide control range is good for both heater cooler.
- 【Compressor delay time, alarm setting】 KT99 thermostat regulator can set the compressor delay time(0~5min) to make the cooler delay start. By setting high/low temperature alarm value to keep the home appliance, incubator, seeding pads, refrigerator ,reptiles, Aquarium, and other appliances safe.
- 【Data storage and reset function.】 All parameters setting can be saved after short circuit and power off, and it also can be reset as requirement.
- 【Temperature calibration】±1°F Control Accuracy with (-30~30°F) Temperature Calibration, can make the all process more accurate, keep the temperature in desired range.
- 【Calibration Settings】Temperature calibration,you can calibrate temp according to requirement.
- 【Safety】Set highest/ lowest upper limit temp to avoid accident.
- 【Operating Mode】Can select cooling or heating working mode.
- 【Intelligent】Automatically start cooling or heating for constant temperature.
- 【Professional】100% brand new and high quality.
- Clean, beveled style suits any decor Sits flush against wall Includes °C and °F Bi-metal sensing element Mounts directly to a 2x4 inch vertical electrical outlet box Fully vented cover allows air sensing in all directions Large knob allows easy adjustment to all temperatures
How Do You Buy The 10 Best 120v Thermostat Switch Of 2022?
Do you get stressed out thinking about shopping for a great 120v thermostat switch? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching 120v thermostat switch, which is why we have assembled a comprehensive list of the greatest 120v thermostat switch available in the current market. We’ve also come up with a list of questions that you probably have yourself.
Featwa has done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for 120v thermostat switch that you consider buying. Your questions might include the following:
- Is it worth buying an 120v thermostat switch?
- What benefits are there with buying an 120v thermostat switch?
- What factors deserve consideration when shopping for an effective 120v thermostat switch?
- Why is it crucial to invest in any 120v thermostat switch, much less the best one?
- Which 120v thermostat switch are good in the current market?
- Where can you find information like this about 120v thermostat switch?
We’re convinced that you likely have far more questions than just these regarding 120v thermostat switch, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.
Potential sources can include buying guides for 120v thermostat switch, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible 120v thermostat switch. Make sure that you are only using trustworthy and credible websites and sources.
Featwa provides an 120v thermostat switch buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available 120v thermostat switch currently available on the market.
This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:
- Brand Value: Every brand of 120v thermostat switch has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
- Features: What bells and whistles matter for an 120v thermostat switch?
- Specifications: How powerful they are can be measured.
- Product Value: This simply is how much bang for the buck you get from your 120v thermostat switch.
- Customer Ratings: Number ratings grade 120v thermostat switch objectively.
- Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their 120v thermostat switch.
- Product Quality: You don’t always get what you pay for with an 120v thermostat switch, sometimes less, and sometimes more.
- Product Reliability: How sturdy and durable an 120v thermostat switch is should be an indication of how long it will work out for you.
Featwa always remembers that maintaining 120v thermostat switch information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.
If you think that anything we present here regarding 120v thermostat switch is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly!